Tree-based intercropping systems increase growth and nutrient status of hybrid poplar: A case study from two Northeastern American experiments

Tree-based intercropping is considered to be a potentially useful land use system for mitigating negative environmental impacts from intensive agriculture such as nutrient leaching and greenhouse gas emissions. Rapid early growth of trees is critical for rapidly accruing environmental benefits provided by the trees. We tested the hypothesis that intercropping increases the growth and nutrient status of young hybrid poplars (Populus spp.), compared to a harrowing alley treatment (i.e., no intercrop), in two experimental sites (St-Rémi and St-Édouard) in southern Québec, Canada. Three hybrid poplar clones (TD3230, Populus trichocarpa × deltoides; DN3308, P. deltoides × nigra; and NM3729, P. nigra × maximowiczii) were planted at St-Rémi. Clones DN3333 and DN3570 were planted at St-Édouard. At St-Rémi, intercropping comprised a 4-year succession of three crops of soybean (Glycine max (L.) Merr.) and barley (Hordeum vulgare L.). At St-Édouard, intercropping comprised a 3-year succession of buckwheat (Fagopyrum esculentum Moench), winter rye (Secale cereale L.), and winter wheat (Triticum aestivum L.). At St-Rémi, four years after treatment began, leafless aboveground biomass of hybrid poplars in the intercropping treatment was 37% higher compared to that in the harrowing treatment. At St-Édouard, after the third growing season, leafless aboveground biomass of hybrid poplars in the intercropping treatment was significantly higher by 40%. Vector analysis of foliar nutrient concentrations and comparison with critical concentration values showed that N (both sites) and K (St-Édouard) were the most limiting nutrients. Hybrid poplar clones responded similarly to treatments, with no consistent differences in tree growth observed between clones. We conclude that tree-based intercropping systems may offer an effective means of improving the early growth of hybrid poplars planted to provide both environmental services and high-value timber.     

Hydro-mechanical behavior of municipal solid waste subject to leachate recirculation in a large-scale compression reactor cell

The paper presents the results of a laboratory experiment on Municipal Solid Waste (MSW) subjected to one-dimensional compression in a 1 m3 instrumented cell. The focus was on the hydro-mechanical behavior of the material under conditions of confinement and leachate percolation that replicate those found in real-scale landfills. The operation of the apparatus is detailed together with the testing methodology and the monitoring program. Two samples of waste were tested: the first extended over a period of 10 months ('Control Test') and the second for 22 months ('Enhanced Test' with leachate recirculation). Consolidation data is reported with regard to both short-term (stress-dependent) and long-term (time-dependent) settlements. A discussion follows based on the derived values of primary and secondary compression ratios. Correlations between compression parameters and the biodegradation process are presented. In particular, results clearly highlight the effect of leachate recirculation on waste settlement: 24% secondary deformation reached after slightly less than 2 years (equivalent to a 5-fold increase in compressibility) and 17.9% loss of dry matter. Comparisons are proposed considering the results derived from the few monitoring programs conducted on experimental bioreactors worldwide. Finally, the hydraulic characterization of waste is discussed with regard to the evaluation of effective porosity and permeability.     

Bioaerosol sampling by a personal rotating cup sampler CIP 10-M

High concentrations of bioaerosols containing bacterial, fungal and biotoxinic matter are encountered in many workplaces, e.g. solid waste treatment plants, waste water treatment plants and sewage networks. A personal bioaerosol sampler, the CIP 10-M (M-microbiologic), has been developed to measure worker exposure to airborne biological agents. This sampler is battery operated; it is light and easy to wear and offers full work shift autonomy. It can sample much higher concentrations than biological impactors and limits the mechanical stress on the microorganisms. Biological particles are collected in 2 ml of liquid medium inside a rotating cup fitted with radial vanes to maintain an air flow rate of 10 l min(-1) at a rotational speed of approximately 7,000 rpm. The rotating cup is made of sterilisable material. The sampled particles follow a helicoidal trajectory as they are pushed to the surface of the liquid by centrifugal force, which creates a thin vertical liquid layer. Sterile water or another collecting liquid can be used. Three particle size selectors allow health-related aerosol fractions to be sampled according to international conventions. The sampled microbiological particles can be easily recovered for counting, incubation or further biochemical analysis, e.g., for airborne endotoxins. Its physical sampling efficiency was laboratory tested and field trials were carried out in industrial waste management conditions. The results indicate satisfactory collection efficiency, whilst experimental application has demonstrated the usefulness of the CIP 10-M personal sampler for individual bioaerosol exposure monitoring.     

Environmental and economic life cycle assessment for sewage sludge treatment processes in Japan

Life cycle assessment for sewage sludge treatment was carried out by estimating the environmental and economic impacts of the six alternative scenarios most often used in Japan: dewatering, composting, drying, incineration, incinerated ash melting and dewatered sludge melting, each with or without digestion. Three end-of-life treatments were also studied: landfilling, agricultural application and building material application. The results demonstrate that sewage sludge digestion can reduce the environmental load and cost through reduced dry matter volume. The global warming potential (GWP) generated from incineration and melting processes can be significantly reduced through the reuse of waste heat for electricity and/or heat generation. Equipment production in scenarios except dewatering has an important effect on GWP, whereas the contribution of construction is negligible. In addition, the results show that the dewatering scenario has the highest impact on land use and cost, the drying scenario has the highest impact on GWP and acidification, and the incinerated ash melting scenario has the highest impact on human toxicity due to re-emissions of heavy metals from incinerated ash in the melting unit process. On the contrary, the dewatering, composting and incineration scenarios generate the lowest impact on human toxicity, land use and acidification, respectively, and the incinerated ash melting scenario has the lowest impact on GWP and cost. Heavy metals released from atmospheric effluents generated the highest human toxicity impact, with the effect of dioxin emissions being significantly lower. This study proved that the dewatered sludge melting scenario is an environmentally optimal and economically affordable method.     

The metal mining industry in Eastern Europe

The mining industry has been one of the backbones of the socialist countries of Eastern Europe, not only in economic, but also in political, terms. Three years after the beginning of economic reforms, the mining industry in all the Eastern European countries is facing dramatic changes. Most mines are mining ores below acceptable cut-off grades, and there is no hope of finding new, richer deposits. Downstream metallurgical industries will need to replace their former suppliers. In addition, the social contract that had been maintained under the socialist governments is about to be undone and a new form of internal organization must be found. The success of the economic reforms in Eastern Europe depends upon the capacity to develop new industrial relations: the large mining combinates will have to be transformed into competitive capitalist enterprises and the role of the state must be redefined. Prospects for this transformation vary greatly, from metal to metal and from country to country. Finally, restructuring in Eastern Europe will also affect European and world markets, both on the supply and demand sides. The integration of the Eastern European mining industries into the international mining community should be the medium-term goal of all the participants .     

Chemical characterization of contact semiochemicals for host-recognition and host-acceptance by the specialist parasitoid <Emphasis Type="Italic">Cotesia plutellae</Emphasis> (Kurdjumov)

Summary. Cotesia plutellae is a specialist parasitoid of Plutella xylostella. This specificity is potentially under the control of several factors before and after oviposition. Thereby, the stimuli that lead female parasitoids to host locations and to oviposition, might be at the basis of the specificity. We explore here the response of C. plutellae females exposed to host cuticular lipids. A total cuticular lipid extract of host caterpillars was fractionated into a hydrocarbon fraction and a non-hydrocarbon fraction. Neither fraction alone had any effect on oviposition behaviour in C. plutellae but the hydrocarbon fraction alone did seem to have a positive effect on the rate of antennal contact by the females. To induce oviposition behaviour, both fractions were necessary and reflect cooperation between at least one compound in each fraction. Identification of cuticular lipids shows that hydrocarbons were dominant (77%). Non-hydrocarbon compounds were mainly represented by 15-nonacosanone (18% of the total lipid extract). This ketone is rare in insect cuticle lipids and is thought to originate from the cabbage epicuticle where it is dominant with n-C₂₉ and 14- and 15-nonacosanol also found among the cuticular lipids of the host caterpillar.     

Defining patch mosaic functional types to predict invasion patterns in a forest landscape.

Alien plant invasions contribute significantly to global changes by often affecting biodiversity and ecosystem processes. Operational methods for identifying landscape attributes that promote or constrain plant invasions are urgently needed to predict their future spread and manage them efficiently. We combined landscape and functional ecology concepts to define patch mosaic functional types (PMFTs) as groups of cells showing the same response to a plant invasion in a heterogeneous forest landscape. The invasion of a European temperate forest by the American black cherry (Prunus serotina) has been chosen as a case study. A set of variables was collected, mapped using a Geographic Information System, and analyzed with multivariate analyses to correlate landscape traits with Prunus serotina abundance in each cell of a grid overlaid on the forest. A risk index was derived and mapped for three invasion levels: seedling colonization, tree establishment, and ecosystem invasion. Five PMFTs were identified and characterized by a set of traits related to soil properties, land use, disturbance, and invasion history. Scots pine plantations on podzols were the most invasible, while cells dominated by hydromorphic or calcareous soils were the most resistant. Most colonized patch mosaics provided suitable conditions for future establishment and invasion. Being strongly spatially connected, suitable patches provide corridors for Prunus serotina to colonize new parts of the forest. Conversely, the most resistant PMFTs were spatially agglomerated in the south of the forest and could act as a barrier. Colonization, establishment, and invasion risk maps were finally obtained by combining partial risks associated with each landscape trait at the cell scale. Within a heterogeneous landscape, we defined and organized PMFTs into a hierarchy, according to their associated risk for colonization, establishment, or invasion by a given invasive species. Each hierarchical level should be associated with a management strategy aiming at reducing one or more partial risk. Monitoring safe areas, extending cutting rotations, harvesting recently colonized stands tree by tree, promoting a multilayered understory vegetation, cutting down reproducing alien trees, favoring shade-tolerant, fast-growing, native tree species, removing alien trees at the leading edge, and proposing soil enrichment or irrigation in heavily invaded areas are recommended.     

Effects of power-plant cooling systems on marine phytoplankton

The large quattities of marine phytoplankton passing through the cooling systems of two Southern California coastal power plants were found to be greatly reduced in numbers (41.7%) and in volume (33.7%). The biomass killed from June, 1972 to May, 1973 amounted to approximately 1,700 tons of organic carbon. Phytoplankton mortalities were most pronounced from October to December when intake waters of 17° to 20°C were subjected to temperature elevations of 9 to 11C°, and were lowest from January to March when cooler ambient temperatures prevailed. There was no apparent reduction in phytoplankton stocks when the intake water was cooler than 15°C. Surviving cells in 25° and 26.5°C effluent waters were growing three times faster than influent populations, which suggests that power-plant effects on phytoplankton stocks are often short-lived. However, entrainment effects appear very disruptive, in changing the structure of phytoplankton communities and in constantly reducing species diversity (H′). Passage through the condenser tubes affected algal species differentially, killing diatoms in greater numbers (45.7%) than dinoflagellates (32.8%), and reinforcing the dominance of the two major species, Asterionella japonica and Gonyaulax polyedra, that were the most tolerant. The severity of the impact appears to be controlled by two interacting factors: intake water-temperature and magnitude of temperature increase. On this basis, use by coastal power plants of deep-sea water for cooling is strongly advocated.